BRBJ铝合金机边熔化炉

设备特点Features

1、 采用先进的硅酸铝板材料，运用中国鲁班棒卯工艺加上硅酸铝板胶水相结合组成无缝炉胆，硅酸铝板材

料优于一般保温材料，抗铝水腐蚀能力强、不易挂渣、不易粘铝、容易清渣，保温效果更佳，炉体使用寿

命更长。

2、 炉壁采用先进的纳米材料、高密度陶瓷纤维断热板，使炉表温度更低，炉表温度常温加15摄氏度(除加

热器周围)

3、 采用日本华井侵入式加热管以电能底部加热，电控发热系统由SCR比例式控制，炉体表面平均温度控制在

环境温度+35°C以下(除加热器周围外)，减少热损失，以更好的改善操作环境，节约能源，稳定汤温， 提局铝质。

1. Adopt advanced aluminum silicate board material, using Chinese Luban tenon and mortar process plus aluminum silicate board glue to form a seamless furnace, aluminum silicate board material is superior to general thermal insulation materials, strong resistance to aluminum water corrosion, not easy to slag , Not easy to stick aluminum, easy to remove slag, better heat preservation effect, longer furnace life.

2. The furnace wall adopts advanced nano-materials and high-density ceramic fiber heat insulation plates to make the furnace surface temperature lower, and the furnace surface temperature is 15 degrees Celsius at normal temperature (except around the heater)

3. 

The Japanese Huajing intrusive heating tube is used to heat the bottom of the electric energy. The electronically controlled heating system is proportionally controlled by SCR. The average surface temperature of the furnace body is controlled below the ambient temperature +35 C (except around the heater) to reduce heat loss. To better improve the operating environment, save energy, stabilize soup temperature, and improve aluminum quality.

BRBJ 铝合金机边熔化炉基本参数 BRBJ Basic parameters of aluminum alloymachine side melting furnace